The Monolith Display Stand Assembly Manual
Love for games
Overview
Your parts may differ slightly from the picture. This is because almost all stands are individually adapted to the modules. However, the principle is the same for all Monolith stands.
Small parts
It should be clear and obvious, but:
Contains small parts! Keep away from children!
Work in a clean environment!
Preparation
Spread a soft cloth flat on a table and make sure you have a dust-free environment.
A microfiber cloth can be very helpful.
SUPER IMPORTANT!!!!!!111eleven
Remove Foil
Remove the protective film from both sides of all parts before assembly!
Otherwise the parts will be damaged!
The film can be blue, green or milky colored.
If you have trouble removing it, gently scratch along one edge with a plastic card.
Mmm... delicious...
Build a sandwich.
Build a delicious sandwich. Clean each part if necessary.
Put the sleeve screw through the first piece and lay it flat on the cloth. You are now looking at the back of the sandwich.
Balanced.
Layer it to make a sandwich.
Layer a delicious sandwich. Finally, screw it tight. But NOT TOO TIGHT! Parts will break and crack if overtightened.
Breathe deeply
Last Step
Insert the 2 holders into the base plate. If they don't fit, turn the plate around.
Now CAREFULLY!!! put the sandwich into the holders from above. You can CAREFULLY!!! wiggle it back and forth a little if it doesn't fit straight away or if it gets jammed.
Sustainable!
Disposal Instructions
The packaging material is recyclable, the cardboard and filling material are made from recycled paper. Simply reuse the cardboard, filling material and bag! Use them to store things or send games that you want to get rid of.