Love for games
Overview
It's best to get an overview of all the individual parts. Please read the instructions completely.
This stand is designed for the Nintendo Wii and WiiU wheel or steering wheel, as well as the Switch steering wheel. Third-party steering wheels will most likely not fit.
Small Parts
It should be clear and obvious, but:
Contains small parts! Keep away from children!
SUPER IMPORTANT!!!!!!111elf
Remove Foil
Remove the protective film from both sides of all parts before assembly!
Otherwise the parts will be damaged!
The film can be blue, green or milky colored, sometimes transparent clear.
If you have trouble removing it, gently scratch along one edge with a plastic card.
Also super important!!!!
Attention
If the pieces don't fit, flip the base over. *Carefully* twist and tilt the pieces until they drop into the socket.
Then press the parts into the openings.
The protective film MUST be removed before installation.
Super easy
Assembly
Put the parts together as shown in the picture. Be careful. It is recommended to first put the main holder into the base plate and then the bracket into the holder. Make sure that you only apply pressure in the middle of a part and do not tilt it or apply pressure at an angle. Otherwise the parts will break.
Sustainable!
Disposal Instructions
The packaging material is recyclable, the cardboard and filling material are made from recycled paper. Simply reuse the cardboard, filling material and bag! Use them to store things or send games that you want to get rid of.