Love for games
Overview
Your parts may differ slightly from the picture. This is because almost all stands are individually designed for the modules. However, the principle is the same for all Monolith stands without screws.
Small Parts
It should be clear and obvious, but:
Contains small parts! Keep away from children!
Work in a clean environment!
Preparation
Spread a soft cloth flat on a table and make sure you have a dust-free environment.
A microfiber cloth can be very helpful.
SUPER IMPORTANT!!!!!!111evelen
Remove Foil
Remove the protective film from both sides of all parts before assembly!
Otherwise the parts will be damaged!
The film can be blue, green or milky colored, sometimes transparent clear.
If you have trouble removing it, gently scratch along one edge with a plastic card.
Mmm... delicious...
Build a sandwich.
Build a delicious sandwich. Clean each part if necessary. Lay it flat on the cloth.
Danger of scratches
Attention
Please make sure that you do NOT put the base parts on the stand from above. The "ring" (the part with the larger hole) must be put on from below. Otherwise the outer layers of the stand could be scratched!
Simple, right?
Layer it to make a sandwich.
Follow the picture!
Slide the rings onto the sandwich from BELOW.
After everything is assembled, place the stand
on a flat surface.
Breathe deeply
Last Step
Finally, press the ring down to align everything nicely.
Sustainable!
Disposal Instructions
The packaging material is recyclable, the cardboard and filling material are made from recycled paper. Simply reuse the cardboard, filling material and bag! Use them to store things or send games that you want to get rid of.