Love for games
Overview
Caution is advised with this stand. Please read the instructions carefully. It is easier than it looks. The most important thing: take your time with the assembly, pay attention to the order and do not apply force to protruding parts (e.g. the winding aid) as they will break. Please only wind up the cable loosely. If you pull the cable tightly when winding it up, parts will break off.
Small Parts
It should be clear and obvious, but:
Contains small parts! Keep away from children!
SUPER IMPORTANT!!!!!!111eleven
Remove foil
Remove the protective film from both sides of all parts before assembly!
Otherwise the parts will be damaged!
The film can be blue, green or milky colored.
If you have trouble removing it, gently scratch along one edge with a plastic card.
Also super important!!!!
Attention
If the pieces don't fit, flip the base over. *Carefully* wiggle and tilt the pieces until they drop into the socket.
Then press the parts into the openings.
The protective film MUST be removed before installation.
Super easy
Assembly
Lay the base plate flat on the table. Just follow the order in the picture. First the small triangular parts have to go into the base plate. Then the long parts.
You have to be especially careful with the holder with the protruding parts for the cable winding!
Carefully.
Sustainable!
Disposal Instructions
The packaging material is recyclable, the cardboard and filling material are made from recycled paper. Simply reuse the cardboard, filling material and bag! Use them to store things or send games that you want to get rid of.